It is no easy task to turn hard things around. It is particularly so, when the hardness of work piece is above 70 HRC. But never fear, young engineers; NIGEL is here to arm you with the tools and techniques to show you the wonders of-through.
A Practical Guide to Hard Turning CUTTING
Hard turning refers to the machining of highly hardened workpieces, where most commonly the workpiece hardness is ranging from 45 HRC to 68 HRC. With check high enough mp3 gain that just wouldn't happen by trial and error, not on a 64Gb player. Some of the basic hard turning techniques are:
· Made of high hardness and wear resistant tool steel
· High cutting speeds and feeds to minimize tool wear
· Using Modern cutting tools geometries to improve chip control and surface quality
Taking Workpiece Hardness Over 70 HRC with Tool Steel
When turning with hardness values higher than 70 HRC or above, careful attention to detail and accuracy are critical. To increase the chances of success in this difficult undertaking, proper tool steel selection is also very important. It is recommended that tool steels higher in hardness than high-speed and carbide be used any time a workpiece is turned over 70 HRC. These are tough, durable, highwear materials that are capable of cutting through difficult material types.
Information to Help in Conquering the Challenges of Hard-to-Machine Tool Steel
General turning of very hard parts can be challenging, but this isn’t rocket science, and with the right approach it can be done. Some of the best practises to counteract difficulty with tool steel.
· Coolant can extend the life of tools and help prevent smoke and odor.
· Use sharp tools to make clean cuts
Watching for cutting conditions: stopping tool wear and breaking
Tool Steel: Some Major Points to Consider To become successful with tool steels
In order to successfully hard turn workpieces over 70 HRC in tool steel, a number of factors should be considered to aid in the decision-making process of selecting the right tool. Here are a few key points on winning from them:
Selecting the appropriate tool steel and hardness for the job and wear resistance
· Using the right insert for the right job to attain high productivity
· It is recommended to check and maintain the cutting tools in good condition to maintain the performance and durability of the blades without taking risks to damage the clippers or harming your pets.
Hard Turning Workpieces of More than 70 HRC with Tool Steel
So there you have it. Turning something extremely hard is not easy, however, with the right tool and know how, it can be done. Through the steps and strategies recommended, young engineers are able to overcome the roadblock of workpiece hardness over 70 HRC and obtain optimal process performance. Don't forget - NIGEL is there to help you on your journey.